PA-LV03SUB

System; 12” V-type bandpass type
Speaker unit bass: 2 × 12 “driver, 3” voice coil Frequency range: 40Hz-300Hz
Sensitivity: 104dB Impedance: 8Ω Power: 600W (RMS)                     
Maximum sound pressure: 137(RMS) 143dB(PEAK)                                                                 
Body Material: Birch plywood, environmental protection water-based paint
Size: 468×545×635MM (W*D*H)
Weight: 38Kg                                           
Amplifier type: Class D full bandwidth PWN modulator, with ultra-low distortion                                                                         
Maximum output power: 8 4ohms 1*900w       
Maximum output power: 4 ohms 1*1000w 
Output Voltage: +/-70V (SE Mode unloaded)/Bridged
+/-140V (BTL Mode unloaded) THD                                    
Power Rating: 4Ω (1KHz) <0.005% (20HZ-20KHz, 8Ω loaded, 3dB below rated power)
Signal-to-noise ratio: >120dB (A-weighted, 20KHz, 8Ω loaded)                                                    
Frequency Response: 20Hz-20KHz±0,15dB (8Ω loaded, 1dB below rated power) Damping Factor＞1000 (8Ω loaded, 1KHz and below)                                  
Power supply: Stand-alone switching power supply (Power Factor Correction) and can be fully converted               
Operating range: General purpose power supply 85-265V supply current consumption                          
Heat: @230V 11.2W/-A/38.3BTU/h (idle) 173 man/-work 143.4BTU/h (1/8max. power @ 4Ω)
Protection: Over current, over/under voltage, output DC and over temperature protection
Digital Input: 1X XLR level, +12dB                                              
Digital Output: 1X XLR level (Link)
Dimensions (W×H×D): 468×545×635MM
Weight: Kg